Operating principles
● The aseptic sampling valve is designed for sterilization before and after each sampling.
● Open: Sampling-The manual valve is opened by rotating the handle(adjustable valve) or by activating the lever(on/off valve).
   The stem and the membrane are then retracted, allowing liquid to pass.
● Closed: Sterilizing-The built-in spring closes the valve and keeps the channel open between the hoses though reverse process
   in order to sterilize. If using by steam, a small pressure relief valve(optional ) on the outlet is recommended.
● Standard Design: the aseptic sampling valve consists of three parts, a valve body, a handle and a membrane. The rubber membrane is placed on the stem of the valve and works as a stretchable plug.
● Connection: Thread, Welding, Pipe tank welding, Clamp.
● Handle: (1)Turning handle  (2)removable key.
Material
● Valve body: AISI 316L
● Handle: AISI 304
● Membrane: MVQ/EPDM
Temperature
● Max. Temperature: 130℃
● Dry steam: (2bar)130℃
Recommendation: the Seals should be replaced after 200 times sterilization.
Technical specification
● Max. Working pressure: 600kpa(6bar)